Home / All / ABB Replacement / ABB Safety Mats Replacement /

For ABB ASK-Series Aluminum Edge Safety Mat Replacement

For ABB ASK-Series Aluminum Edge Safety Mat Replacement

For ABB ASK-Series Aluminum Edge Safety Mat Replacement
For ABB ASK-Series Aluminum Edge Safety Mat ReplacementFor ABB ASK-Series Aluminum Edge Safety Mat ReplacementFor ABB ASK-Series Aluminum Edge Safety Mat ReplacementFor ABB ASK-Series Aluminum Edge Safety Mat ReplacementFor ABB ASK-Series Aluminum Edge Safety Mat Replacement
CategoriesABB Safety Mats Replacement
BrandDADISICK
ModelASK-Series | ASK-1U4.4-NP
Series:ASK-Series
Activation force:Nominally 150 N (Round body 80 mm)
Maximum load:2000 N over Ø 80 mm
Response time:Please refer to the following
Material:Black polyurethane
Degree of protection:IP65
Certifications:cULus, TÜV
Update TimeDec 5,2024
Detail Information
For ABB ASK-Series Aluminum Edge Safety Mat Replacement Parameter
Brand
From network
DADISICK
Models
Dimensions
Models
Dimensions
Technical data
ASK-1U4.4-NP
1000 mm × 1500 mm × 14 mm
DT15-150X100
1000 mm × 1500 mm × 15 mm
1000 mm × 1000 mm × 14 mm
DT15-100X100
1000 mm × 1000 mm × 15 mm
1000 mm × 750 mm × 14 mm
DT15-100X75
1000 mm × 750 mm × 15 mm
Activation force
Nominally 150 N (Round body 80 mm)
20 kg min. (20 kgf ≈ 196.1 N)
Maximum load
2000 N over Ø 80 mm
400 N/cm²
Response time
Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms
Including Pluto incl. Pluto bus: 
Normal condition: < 40 ms
At fault condition: < 70 ms
18 ms 
Material
Black polyurethane
NBR
Degree of protection
  IP65
IP65 / IP67
Certifications
cULus, TÜV
TÜV
Connection
M8
Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²)
R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life
> 1,000,000 times
> 3,000,000 times
Ambient operating temperature
-10℃ to 55℃
-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.
Product model display instructions
The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.
Product recommendations
DADISICK Pressure Sensitive Safety Mats
DT15 series safety mats
Models:
DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,
DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,
DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,
DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:
For non-standard dimensions of safety mats, the side length should be < 3000 mm, and the area should ≤ 1.5 m².

FAQ
How are pressure sensitive safety mats installed?
A: Pressure sensitive safety mats are usually installed on the floor in the area to be monitored and connected to the safety control system. Ensure the mat is flat and unobstructed during installation, and follow the manufacturer's instructions for electrical connections.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
Satety Mat Electrical Wiring Diagrams
K-Type Dual Channel 4-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection
R-Type 2-Wire Mat Connected Relay Ter-A Safety Input With Manual Reset
The control principle diagram of safety mat safety protection
Sensing Output - K-K Series Combination Of Safety Mats
Sensing Output - R/K Series Combination Of Safety Mats
Sensing Output - R-K Series Combination Of Safety Mats
Sensing Output - K/K Series Combination Of Safety Mats
DT15 Series Safety Mat Data Sheet
Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Industrial Automation Security Solutions